-
Before you start uploading your research data to the Data Archive, make sure it is organised and in alignment with 91色情片 recommendations and, that you know the听听you have to the听听inside the Data Archive. Read the听听and the听听pages for more information. To access the data archive you will need:
An active 91色情片 zID and zPass. To verify your zID/zPass visit the听.
Access to the 91色情片 Network, either on a 91色情片 campus or by using the听
础苍听approved听听() (see the听听page for more information).
Research data听听for upload into the Data Archive.
听appropriate to the tasks you wish to undertake within the Data Archive.
- If you are听downloading data, you need to听听before you start the download, see听听for how to do this.
-
The 91色情片 Data Archive听听provides access to an interface enabling you to听upload,听download,听locate, and听review听your research data. The Data Archive听听is suitable for researchers who wish to听听the Data Archive and to either upload or download听less听than 50 gigabytes (GB) of data and/or听less听then 1000 files (during a single session).
Researchers who frequently upload or download data, and/or generate datasets, may wish to schedule a regular upload or download of data using the听听or use听SFTP听rather than manually uploading and downloading data via the听.
- Researchers who upload or download more than 50 GB of data and/or more than 1000 files, at a time, please use SFTP by following the steps set out below.
- Researchers who wish to schedule a regular upload or download of data, please see the听.
-
To upload and download research data with SFTP (Secure File Transfer Protocol) you will need to have a SFTP Client on your PC. Instructions are provided below for FileZilla, which is available for Mac OS, Windows and Linux. Please contact your local IT support or the听听(9385 1333) to get this application installed, or download from the听听if you are able to install software on your PC.
Note: You can use any software that supports SFTP connections, the settings you need are below:
- Host: rds.unsw.edu.au
- Port: 8022
- Protocol: SFTP
- Username: 91色情片_RDS:zID (e.g. 91色情片_RDS:z1234567)
- Password: [your zPass]
To verify your 91色情片 zID/zPass visit the听.
The following clients have been verified as working. Clients not on this list should also work but have not been tested:- OSX SFTP (Mac OSX Command Line Client)
- Transmit (Mac OSX Client)
- WindSCP (Windows Client)
- FileZilla (Mac OSX/Windows/Linux Client)
- Cyberduck (Mac OSX Client)
-
Important:听If you are听downloading data, you need to听听before you start the download, see听听for how to do this.
To connect to the Data Archive from a SSH terminal over SFTP you can use the following commands.听
To find your SFTP version use this command:
sftp -V
For sftp version 7.7 onwards:
sftp -oPort=8022 -r sftp://91色情片_RDS:[zID]@rds.unsw.edu.au听
Older linux systems may require a different command:
- sftp -oPort=8022 -r 91色情片_RDS:[zID]@rds.unsw.edu.au or
- sftp -oPort=8022 91色情片_RDS:[zID]@rds.unsw.edu.au
If you are connecting from outside of the 91色情片 Network you will need to connect to the听听first before connecting with SFTP. Alternatively, if you can SSH from the external computer with the data to a system on the 91色情片 Network (For example, from the NCI system to the Katana HPC cluster), you can use one of these commands to route your upload through the local system without needing the VPN:
If you use this command you will need a Katana account, if you don't have one yet apply for one at .听
sftp -oPort=8022 -J [zID]@kdm.restech.unsw.edu.au -r sftp://91色情片_RDS:[zID]@rds.unsw.edu.au
sftp -P 8022 -oProxyJump=[zID]@kdm.restech.unsw.edu.au:22 -r sftp://91色情片_RDS:[zID]@rds.unsw.edu.au
Note:
- You can use the听put听and听get听commands to transfer files.
- To send an entire folder depends on what version of SFTP is installed (version > 4.7).
- You can use听dir听or听ls听to list the files and folders in the current directory.
- For further information, see听.
-
1. Download FileZilla from the听听website
2. Install the FileZilla application
3. Start/Open FileZilla
4. Click 'File', then 'Site Manager' or click the icon in the top right of FileZilla
5. Click 'New Site', then fill in the details as displayed in the image below, including "SFTP" next to "Protocol":
6. Click 'Connect'. This will start the connection to the server. A popup may appear asking you to confirm the host key of the server. It is safe to add this key to your cache by ticking the box.
7. You will see the Data Archive Collections you have access to in the 'Remote Site' panel on the right side. Navigate to the location you need here. You can browse your local computer's files on the 'Local Site' panel on the left.\
8. Some additional settings that can help your uploads are found in the File menu in Settings (FileZilla menu on Mac). Click Connection and then set your 'Timeout in seconds' to 90
9. Click 'Transfers' and change 'Maximum simultaneous transfers' to a higher number such as 10.
-
Note: you will need听Lead Chief Investigator听(LCI),听Research Project Manager, or听Contributor听access rights to upload data to the Data Archive. See the听听FAQ to find out your access rights for a project.
Important:听If you are听downloading data, you need to听听before you start the download, see听听for how to do this.
1. Start/Open FileZilla
2. Click 'File' and select 'Data Archive' (or the name you chose when setting up the connection)
3. With the SFTP Client now open, drag the files and folders you want to transfer to the destination you require:
- for uploading files or folders, you will drag from Local Site to Remote Site
- for downloading files or folders, you drag from Remote Site to Local Site.
4. The files you are transferring will be queued in the bottom panel of the client and begin to transfer. Any errors will be listed in the "Failed Transfers" tab at the bottom. You can right-click in the panel to re-queue and retry an individual file, or all failures.
Note: when the 'Target file already exists' dialog box appears, where you are uploading a file already present in the Data Archive, and using FileZilla, select the following parameters:
